• Product introduction
  • swimming pool water sterilizing device

swimming pool water sterilizing device

Our ultraviolet sterilizing system has the structure of respective sterilizing parts, so as not to make any blind spot, superceding ozone sterilizing systems. .

overview

Sterilizing treatment of swimming-pool water with ozone is consisted of many facilities like air-compressor, moisture-eliminator, oxygen-generator, ozone generator, mixing reactor, dissolved ozone remover, waste-ozone-cracker, and so on, so it costs high installation and maintenance cost, and there was difficulty in operaing with the ozone leaking accident.
For this reason, Problems of inducing respiratory and skin troubles and causing swimming pool's disgusting odor have been consistently aroused because of expedient management of sterilizing swimming pool's water only using disinfectant which is used for suppressing germ growth.
Swimming pool's water sterilizing problem can be solved by replacing ozone sterilizing system having trouble with high cost and difficulties in maintenance with sterilizing device with high quality of sterilizing power without sterilizing blind spot.

  • 01.new concept sterilizing device without UV irradiation and flow blind spot can maximize the sterilizing power upto 5000 ton/day to replace the ozone sterilizing device.
  • 02.As the byproduct of the swimming pool's water decomposed by UV and alleviate the disgusting odor, it leads to maximizing reusing efficiency of water and energy reduction by reducing the amount of air ventilation at the swimming pool as well.
  • 03.Compared to ozone treatment device, it doesn't demand professionality, enables unmanned operation, doesn't make tiny troubles, can cut down maintenance cost with the ease of maintenance and installation.

water analysis report

수영장 수 자외선살균장치 설치사진
수영장 수 자외선살균장치 설치사진

installation picture

수영장 수 자외선살균장치 설치사진
수영장 수 자외선살균장치 설치사진
수영장 수 자외선살균장치 설치사진

comparation of swimming pool's sterilzing device

comparation of swimming pool's sterilzing device I

photocatalytic sterilizing system ozone sterilizing system
outline of construction method
  • - complex sterilization using photocatalysis and UV
  • - Injection medicine and No odor
  • - Easy maintenance allows all times operation
  • - contact sterilization with ozone in complex reacting group
  • - ozone's powerful oxidation/sterilizing power
  • - Difficult maintenance causes non-operation status most of the time.
Advantage
  • - No odor and cancer-causing agent
  • - Low rate of breakdown and Unmanned maintenance is possible
  • - Easy maintenance and low cost

- ozone sterilizing system is facility with great sterilizing power
Drawbacks
  • - New technology product that had been certified as a drinking water, having low level of awareness for low record in applying to swimming pool.
  • - t is not easy to manage ozone sterilizing system because it consists of air-compressor, moisture-eliminator, oxygen and ozone generator, ozone-mixing-reactor, dissolved ozone remover, unreacted-ozone-cracker, and it costs high.
  • - Because of the difficulty in managing ozone sterilizer, it was replaced as a injection of the disinfectants.
  • - Because of the injection of the disinfectants, cancer-causing substance and odor occurred.
  • - Because of the excessive injection of the disinfectants, skin and respiratory related troubled occurred.
  • - Because of the odor and white cast, alternating cycle of the swimming pool' water has been shortened, and water consumed excessively.
Explanatory
  • - Simultaneous sterilizing effect by OH radical and UV enables the alternation of the ozone sterilizing system.
  • - Minimize the range of the alternation of the swimming pool's design because of the installation at the swimming pool's duct line.
  • - Dissatisfaction of the swimming pool's users about the inflow of the ozone, which is very toxic, to the swimming and excessive injection of the disinfectant is solved.
  • - Existing swimming pools are mostly equipped with ozone sterilizing system, but it is neglected because of the difficulties in managing and the increase of the cost of the maintain, and it is becoming waste of budget.
  • - As injecting cheap disinfectants instead of ozone sterilizing system for the purpose of the sterilizing, it causes various problems to the management of the swimming pool.

comparation of swimming pool's sterilzing device Ⅱ

Photocatalytic sterilizing system Ozone sterilizing system
Structure of the sterilizing system 1. Photocatalytic sterilizing module
  • 1. Air-compressor
  • 2. Moisture-remover
  • 3. Oxygen-generator
  • 4. Ozone-generator
  • 5. Ozone-mixing-reactor group
  • 6. Dissolved ozone remover
  • 7. Waste-ozone remover
Place of installation Few
  • Many
Management of the steriliing system
(consumables)		 1. Exchange of the lamps (1 time/year)
  • 1. Exchange of the air-compressor oil (4 times/year)
  • 2. Exchange of the moisture-remover absorbent (2 times/year)
  • 3. Exchange of the air-generator PSA module (1 time/year)
  • 4. Exchange of the ozone-generator discharge tube (1 time/year)
  • 5. Exchange of the waste ozone remover catalyst (2 times/year)
Consuming electricity Withing 1.5 Kw
  • More than 5 Kw
Professional operator Doesn't need
  • Need
Method of operating. 1. Check the operating state of the lamp by supplying power to the photo catalyst sterilizing system.
  • 1. Check the operating state and air-compressor
  • 2. Check the oxygen concentration of the air-generator
  • 3. Check the ozone concentration of the ozone-generator
  • 4. Check the water level of the ozone-mixing-reacting group
  • 5. Check the dissolved ozone concentration of the ozone-mixing-reacting group
  • 6. Check the amount of the dissolved ozone of the dissolved-ozone-vacreator
  • 7. Check the temperature of the waste ozone-remover